Lightforce 35W HID GLOBE REPLACEMENT Manual de usuario descargar pdf

1. DO NOT leave light connected to a power source when not in use.

2. DO NOT place light face down on ANY surface. If the light is switched on the intense heat generated may ignite the

surface and cause a melt down of the lamp body.

3. Ensure all electrical connectors are secure - loose connections will generate excessive heat, damage wiring and cause

electrical failure.

4. The outer lens should be washed clean with copious amounts of water and a clean sponge. Wiping it with a dry rag will

   scratchthelens,especiallyifthesurfaceisdusty.NEVERcleanthelightwithcleaninguidorsolvent.

5. DONOTattempttocleantheinsideofthelightortouchtheinsidelensandreector.

6. FOCUSING MECHANISM: The patented focus mechanism allows precise adjustment of the beam to various

   concentrationpatternsasdesired.SimplyrotatethereectorandselectthedesiredSPOT.

7. Ensureduringusereectorsurfaceisnotwoundtoofarforwardpasttheglobeholderormeltingofthehousingcan

occur and will not be covered under warranty.

8. DO NOT disassemble the light due to high internal voltage!

9. LIGHTFORCEAUSTRALIAPTYLTDshallnotbeliablefordamage,malfunction,failureresultingfromaccident, 

   misapplication,misuse,unauthorisedrepair,neglect,modication,unauthorisedornonstandardreplacement 

parts, accessories, globes, batteries or voltage or the operation of the product beyond its technical and environmental

   specications.Thepurchaseracknowledgesthatlocallawsmayprohibittheuseofsomeoftheproductonmotor 

vehicles travelling on public roads and agrees that it is their responsibility to ascertain the effect of local laws.

SPECIFICATIONS

WeightSL170HID870grams,SL2406HID1.2kgs(includescoilcord)

Electrical Current consumption: 4 amp and 12v

Recommended Operating Temperature (ambient)

-40°C > +40°C Maximum, -40°F > +104°F Maximum

Replacement Bulb GL25 35W 5000°K Super White RM/RMDL

Lumen Output 35 watt 3200 lumens

Run time Operating duration greater than 3 hours from a Lightforce

9A/Hbatterypack

CHANGING THE BULB

HIDbulbsareinherentlyreliableintheeld.Becausethereisnolamentinthebulb,prematurefailureisunusualhowever,

over time the bulb output will diminish or if subject to extreme impact then follow these instructions to change the HID bulb.

i Warning, the HID bulb operates at a high internal pressure. Use safety glasses and do not operate light without have the

reectorandlensassemblyinplace.

i Hint, do not touch the surface of the bulb, handle with gloves.

To change the bulb, it is necessary to access the electrical connections that are built into the base of the handle.

i Warning, high voltages are present in the base. Always ensure the light is disconnected from the power before opening the

case.

Handheld SL-HID USER INSTRUCTIONS

LIGHTFORCEAUSTRALIAPTYLTD•28OrsmondStreet,HindmarshSA5007Australia•www.lightforce.com|email:[email protected]

Australia:Tel:0884400888|Fax:0883460504•Int’l:Tel:+61884400888|Fax:+61883460504

LIGHTFORCEAustraliaPtyLtdshallnotbeliablefordamage,malfunction,failureresultingfromaccident,misuse,misapplication,unauthorisedrepair,neglect,modication,unauthorisedornonstandardreplacementparts,

accessories,bulbs,batteriesorvoltageoroperationoftheproductbeyonditstechnicalandorenvironmentalspecication.

LightforceCustomBuiltisanewdivisionwithinLightforceAustraliaofferingacustomdesignandfabricationservice,specialisinginlightingsolutionsforcustomerswithuniqueindividialneeds.Shouldyouhaveanyspecialrequirementoutside

ofourstandardlightingrange,feelfreetocontactustodiscussyourrequirements.

INSTRUCTION DATA

PRODUCT:Handheld HID

VER: 1.0

DATE: APRIL 2012

1 2

INSTRUCTION DATA 1

Indice de contenidos

Pagina 1 - INSTRUCTION DATA

1. DO NOT leave light connected to a power source when not in use.2. DO NOT place light face down on ANY surface. If the light is switched on the

Pagina 2

Free the internal cables and remover the bulb holder1. Remove the single screw at the base of the handle2. Undo all the screws to access the bottom

Comentarios a estos manuales

Sin comentarios

Lightforce 35W HID GLOBE REPLACEMENT Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Lightforce 35W HID GLOBE REPLACEMENT. Lightforce 35W HID GLOBE REPLACEMENT User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lightforce 35W HID GLOBE REPLACEMENT